Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'89 240DL in Limp-home mode pulling code 2-3-4 200 1989

posted by  ZenArt Glass on  Thu Oct 30 02:55 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The TPS does click, I just replaced it with a new one a couple of days ago. I'll adjust the switch again to be sure I didn't mess it up the first time. There is a little slack in the cable.

I'm goint to order new spark plug wire today from FCP as well as a new coil wire.

I put in a new flame trap and hoses a couple of weeks ago, they were completely clogged.

I noticed that my problems always happen after a big rain. When I opened the hood this morning the 25amp fuse holder was very wet, but the fuse was not blown.

Thanks for your help

--
Andy - 1989, 245DL Automatic Wagon, 225k miles, Branford, Connecticut






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '89 240DL in Limp-home mode pulling code 2-3-4 [200][1989]
posted by  ZenArt Glass  on Tue Oct 28 13:16 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.