Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need a quick answer - front rotor fitment question

posted by  Aye Roll on  Thu Nov 20 13:04 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 21:08 CST 2014
[RELATED]

Hopefully you've already found the answer-
they'll fit if the car has already had it's front bearings converted over using the Volvo bearing kit. Original cars had the wheel bearings in the rotors- later cars have the bearing carrier and a separate rotor, as in the rear.
The kit to convert is around $150- see www.fcpgroton.com/volvo.htm
I'd be surprised if any 740 still has the original on it but you never know.

The Volvo part # for the rotor ought to end in "906". They're the smallest ones Volvo made for the 740- 10.4 inch I believe.
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 221K, 88 744GLE- 202K, 91 244 181K, 88 244GL 145K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need a quick answer - front rotor fitment question
posted by  JBVO  on Wed Nov 19 12:18 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.