Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replace front chassis cross member 700

uid 55's pic
posted by  john sargent on  Wed Dec 24 09:24 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

The early model years of the 700 series were known for breaking the front crossmember. I think the crossmember was re-inforced for the 1987 modle year. The dealer may not be able to tell you because they will only sell the improved version.

To replace the front crossmember you must support the engine from a support resting across the front fender wells, and drop the crossmember. This is like replacing the engine oil pump with the engine in the car. That job is well detailed in the 700/900 FAQ. Go there and read up. The shops quote about 4 hours for this repair, but it will probably take you anywhere from 8 to 16 hours depending on your shop, tools, and personal abilities. I can replace a 700 series engine oil pump in 3.5 hours. It took me almost 8 hours the first time.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replace front chassis cross member [700]
posted by  X-Lr8  on Wed Dec 24 08:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.