Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to Test ECUs? 200 1989

posted by  porkface on  Sun Mar 7 15:24 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

the ecu connectors have numbers. you have to pull the connector and use a magnifying glass. the long row is 1-18, the short 1 is 19-35. don't test from this end, take the phillips screws out of the back and use the backs of the terminals. when testing, use a dvom, connector unplugged for ohms testing, ecu plugged in and key on for voltage tests. good luck, chuck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to Test ECUs? [200][1989]
posted by  someone claiming to be Miike  on Sun Mar 7 15:14 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.