Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Got it out.... 200 1990

posted by  Sirmebes on  Tue Apr 20 14:40 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I used a 28mm socket on one side of the end link, so the bushing can push through without anything blocking it. On the other side I used a 14mm socket and placed it in a vise and just cranked on it. Sprayed it with some WD-40 which helped it a lot. Installtion was reverse, without the the 14mm socket. You don't need it. Little bitta bearing grease goes a long way!

Hope this helps others out there.

Cheers,
Raj
--
90 BMW 325is, 98 BMW 528i, 90 Volvo 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hi all..a quick question on removal of the bushing [200][1990]
posted by  Sirmebes  on Tue Apr 20 05:11 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.