Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuse terminals explained 200

uid 18083's pic
posted by  lucid on  Fri Apr 23 01:26 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

",, I stil don't understand why there is three tabs on each fuse block.
Also, I notice that on each fuse there were about three prongs lined up in which I could connet wires to from front to back...front being closest to me as I'm peering in the fuse box."

If you can imagine seeing them in a side view, wires in your right, the top 2 connectors are on the fused OUTPUT side (Right fuse contact). The bottom connector runs under the fuse to the hot INPUT side (Left fuse contact).

To have your tach getting "fused" power, use either of the Top 2 terminals ( brass "piggy-back" add on terminals are available at Radio Shack if there are no vacant ones). Use the one B.C. suggested.

Adding the tach to the fuse's load is like a fly landing on a garbage truck.
--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need help with fuses...confused by the fuse! [200]
posted by  Mr brick driver  on Thu Apr 22 16:45 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.