Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Remote Entry 700 1991

posted by  john sargent on  Sat Apr 24 07:25 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

You will need to install a front passenger side lock motor and linkage in the driver's door, and electrically disconnect the lock switch surrounding the driver's door lock. The linkage installs mirror image (right to left).

The wires from the switch can be used to operate the locking motor, but you will need to find them at the relay base and connect them to the other wires for the door lock motors. The Central Locking Relay operates by being grounded by the switch in the driver's door. You will need to connect those two wires to your aftermarket remote entry kit.

I bought a wrecked 1990 745T for parts several years ago. It had aftermarket remote entry installed. The interior of the driver's door had been butchered to install the lock/unlock motor from the remote entry kit. Don't do that, get a locking motor and linkage from a 1988 (I think that is when the lock motors changed) or later front passenger side door and use it.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Remote Entry [700][1991]
posted by  wiz9000  on Sat Apr 24 07:06 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.