Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2023 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing belt tensioner - how do I get the new one on? 200 1980

posted by  zrubin on  Mon May 31 14:21 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 20 15:45 CST 2012
[RELATED]

In the process of reassembling my engine after replacing the head gasket (finally!), and decided to install a new tensioner. I had stuck an allen wrench in the hole on the old one to keep the spring compressed, but now that I have to get the spring compressed through the hole on the new tensioner, I'm having trouble. I thought maybe I could lock the barrel end of the piece that goes through the spring into a vise or C-clamp and the press down on the tensioner to compress the spring, but even that method is questionable. What's the best way to do this? Thanks for any tips...

Zack
1980 245DL M46 272k
1988 745T+ M46 192k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing belt tensioner - how do I get the new one on? [200][1980]
posted by  zrubin  on Mon May 31 14:21 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.