Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Basic question about brakes 200

posted by  Jerry Warren on  Sat Jul 17 11:42 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 2 17:06 CST 2008
[RELATED]

I personally would use DOT 4 and recommend Castrol LIMA DOT4. The bleeding sequence has to be done in order to make sure any air is removed.

1. Left rear wheel
2. Left front wheel upper, inner
3. Right front wheel upper, inner
4. Right rear wheel
5. Right front wheel outer
6. Right front wheel lower, inner
7. Left front wheel outer
8. Left front wheel lower, inner

It is alot easier if you have a pressurized bleeder as you don't have to pump the pedal.

I have used this sequence a couple of times on my 75 164 and 82 245 and never had a problem with air remaining in the system.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Basic question about brakes [200]
posted by  Les Lyne  on Sat Jul 17 11:16 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.