Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2023 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

basic help with pulling drums 120-130 1960

uid 9973's pic
posted by  CVOLVO on  Sun Jul 18 10:14 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 13 18:40 CST 2012
[RELATED]

Hello Mike: Yes, it takes a heavy duty wheel puller to remove the rear drums. Remove the castle nut, then put it back onto the axle backwards, otherwise you will ruin the threads on the axle (as the previous owner did on my Amazon!) I also have a die to clean the threads since even using this procedure may still damage the threads. As you can see, you hit the arms of the puller with a small sledge hammer. You can check out other tricks I learned when I did my Amazon a few years ago: http://cvolvo.com/Central/AMAZON/

PS: this picture is from my 444 but they're essentially the same drum

Good luck.
--
Cam a.k.a. CVOLVO.COM







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New basic help with pulling drums [120-130][1962]
posted by  mikeriehm  on Sun Jul 18 02:13 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.