Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Going to have a junky good time...

posted by  rhaire on  Wed Sep 15 12:58 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 4 10:16 CST 2014
[RELATED]

Rear bar- 17mm and 19 mm wrench. It helps to support the rear axel but you can drive the long bolt out with a big punch even with the weight of the axle on it. For the front bar you need a 14 mm socket and a small extension and a 19 mm for the end link nut, and be sure not to lose the front brackets or two-piece grommet. It might take an hour the first time.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Going to have a junky good time...
posted by  someone claiming to be Blake  on Wed Sep 15 12:39 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.