Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

My Rusty Flintstones Floor Pan!!! With Pics- What would you do? 200 1987

posted by  b49 on  Mon Sep 20 17:28 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi All,
I spent the day finally checking out the extent of my rusted floor panel on the driver's side and the below picture link is the combination of pictures taken.

Any advice on the best way to fix this would be greatly appreciated. I don't weld , car is in Monmouth County, NJ, .

Could I run a good gauge-thickness of painted zinc sheet metal the length of damage including under the seat mount and do a combo of things, like on the inside use sheet metal screws, seal it up real good and undercoat underneath? Por 15, anyone? Can I get away with not welding, or must it be welded? I have a bunch of posts on the way to go that I've bookmarked. The seat mount is looking to be rust free, all the welded areas by the rocker panel seem to be fine. But the rear floor pan rust goes pretty far towards the edge of the rocker panel.

Anyway, here's the link and thanks for any advice you can give.

http://img.villagephotos.com/p/2004-9/833956/combotitled.jpg

Thanks everybody.

Michele

'87 245 ,Automatic 200K+







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New My Rusty Flintstones Floor Pan!!! With Pics- What would you do? [200][1987]
posted by  b49  on Mon Sep 20 17:28 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.