Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Most practical way to replace a timing belt for a 740 8 valve? 700

posted by  someone claiming to be Luke on  Sat Sep 25 07:42 CST 2004 [RELATED]

I also highly recomend you buy or make a crank pully holder. You can get one from IPD or the FAQ section has some plans on how to make one yourself. My timing belt atually broke and i had no means to make one and no time to wait to order one so i had to make due. You will be saving yourself a major headache if you have this tool BEFORE you start.
I can't remember what kind of belt i used. It came in an orage box and was made in Germany. Cost $17 at an import auto parts store in my are. Hope this helps. Good Luck!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Most practical way to replace a timing belt for a 740 8 valve? [700]
posted by  someone claiming to be 740 silver  on Sat Sep 25 06:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.