|
Erik;
...typically a (black) wire in a sleave leaves the harness in the area of the brake distribution block on the firewall and runs along the top of tranny to the grounding switch (two types were installed). The other end goes to the relay located (with possibly others) at the Dr side inner fender were it terminates at terminal 85 of the "Relay for Reversing Lights".
"Reversing lights" require, among other things, Fuse 2 to be intact.
See: http://www.intelab.com/swem/122S%20Wiring%20Diagram.jpg this wiring diagram is for an Automatic trans model, but for this purpose, still correct.
I cant see the IRS either...but I'm almost certain they are there...and "working"!
Cheers
|