Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Core Support 200 1988

posted by  richink on  Thu Dec 30 15:42 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Dec 22 04:40 CST 2010
[RELATED]

Merry Christmas and thanks to the dingbat...

You will need to drill out those spot welds and weld them back in or use a little JB Weld. You'll have to haul off pretty much everything (headlights, turn signals, etc...) to make it easy.

You should be able to get it all off without disturbing the A/C condensor. The 2 green wires go over to the micro switch on the receiver/dryer.

--
Happy Bricking!!! - Richard - '87 245 DL , '82 242 GLT - Volvo's are alive and well in Brampton!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Core Support [200][1988]
posted by  someone claiming to be a244owner  on Thu Dec 30 12:56 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.