Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fault Code 1-1-3....suggestions 200 1991

uid 27's pic
posted by  Art Benstein on  Sun Jan 9 08:23 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

In one of your earlier threads on the subject, kpwall made the suggestion to remove power to reset the ECU - then drive to see if the same code(s) return. I could not find a response from you on this. Remove fuse 6 for a few seconds and replace, if you have not yet tried this.

I don't believe anyone will recommend or suggest you replace all the injectors just because that primitive OBD hints at injector failure. Possibly you might be advised to swap the fuel pressure regulator as a cheap parts-change guess to cure a recurring 113, if you have no means to check fuel pressure yourself. Also read about resoldering or replacing your fuel injection relay. Anything that interferes with fuel delivery, not just clogged injectors, might set 113 after a while.
--
Art Benstein near Baltimore






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fault Code 1-1-3....suggestions [200][1991]
posted by  Joyca subscriber  on Sun Jan 9 06:56 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.