Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing timing gear- cant remove it 1800

posted by  mjamgb on  Tue Jan 11 10:39 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 4 14:53 CST 2012
[RELATED]

If all that is left is the central hub you will need to bite the bullet and CAREFULLY create some room to attach the arms of a puller or get a screwdriver between the thrust plate and the hub by... tapping with a hammer.

Give it a firm but not wild tap then grab it and pull. After just one tap you should have room to get a leverage device in there. The idea is to not allow the cam to go forward or backward enough to either drive out the plug (a fair distance) or drop the lifters off the lobes!

The best thing to do is replace the nut so that you cannot drive the cam in more than 1/8" then smack it (with care). Once the hub is loose it should come off with a minimum of fuss.

--
Mike!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing timing gear- cant remove it [1800]
posted by  someone claiming to be dave  on Tue Jan 11 09:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.