Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

crank sensor 200

posted by  Mark Lundell on  Sun Jan 23 08:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 14 21:34 CST 2014
[RELATED]

I just replace the sensor on my 1990 240. The wires were mush. Cost was $40. Note that when I replaced mine that there was a small piece broken off the plastic mounting tab - so brush around the sensor with your hand after you remove the bolt to remove any small pieces. A couple of notes - after the new sensor is in place there is no a chance that you will drop something in the hole - the sensor fills it. Also after the sensor was in place, I tied a small string around the bolt before I put the bolt in. This was to retrieve the bolt in case I dropped it. Good luck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New crank sensor [200]
posted by  rahall84  on Fri Jan 21 12:48 CST 2005 >
  • New crank sensor [200]
    posted by  someone claiming to be 1sciroccofahrer  on Fri Jan 21 13:30 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.