Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oiler orientation 140-160 1974

posted by  Phil S. on  Thu Feb 17 06:35 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

Remove the oiler and clean thoroughly with carb cleaner. You'll be able to see cleaner squirt out the pinhole and know it's open.

It goes so the outboard edge -- the one with the short overhang relative to the tube -- is parallel to the edge of the timing cover. The long overhang side points in the 3:30 - 4:00 position. That aims the pinhole right at the junction of the gears. It's not super critical.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steel timing gear bronze spacer. [140-160][1974]
posted by  uniberp  on Thu Feb 17 04:32 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.