Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

auto to manual swap 140-160

Sorry ! didn't mean to be rude but we should have good information on the Brickboard so that others reading it don't get mislead and make costly mistakes. My donor car checks out by chassis and engine prefix to be a 1974 B30E with M400 box . Using the same checks my transplant car is also a '74 B30E but with B/W 35 auto. Now that I have them both dismantled I can verify that both engines have 8 bolt cranks and both have 13/16" crankshaft pulley bolts.
Maybe the 22mm bolts were on B30F's. Don't know as I've never seen one. Therefore, from my experience, I would say that checking the size of the crankshaft pulley bolt is NOT a reliable way of identifying a B30E with an 8 bolt crank. What does seem to work is the engine prefixes as detailed on the Volvo 164 Club Sweden website.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New auto to manual swap [140-160]
posted by  Aussieken  on Fri Feb 4 09:48 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.