Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Nivomat Replacement 700

posted by  someguyfromMaryland on  Sat Mar 19 01:55 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 8 05:22 CST 2007
[RELATED]

I replaced my Nivomats last night and I wanted to post feedback while it was still fresh in my mind. The archives didn't have alot on the actual replacement. On an '89 765, the job couldn't have been easier. It is NOT necessary to compress the old or new shocks to remove them from either side. They can be worked out of their locations extended. Turn the bottom shock bushing sideways and it will clear the mounting point easier. It may be helpful to lift and lower the control arm with a jack to make it easier to start the lower bolts.

The car has 213 k miles on it and the rear shocks have made a tremendous difference in the ride. Total time for the job was only 1.5 hours, including setting the car up on jackstands. Definitely a DIY job for all but the faint of heart. It doesn't even require more than about three sockets. Cheap commercial plug: I bought my replacements at fcpgroton. Thanks, Nick.

HTH someone else,

someguyfromMaryland






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Nivomat Replacement [700]
posted by  someguyfromMaryland  on Sat Mar 19 01:55 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.