Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

hard to pull out the relay board 700 1989

There is no "board" in there. There are however tiny printed circuit boards inside each of the relays that do fail because of bad solder joints. Where the relays plug in could perhaps be called a "board" but it is really a terminal block or some such name, connections there do not usually fail or get cracked and useless. Failure of a relay is however very common. Pull em out, remove the plastic cover and have a close look. Understand that just because a relay "clicks" does not mean it is good.

What problems are you having other than OD (and that is quite likely a problem in the relay)? By fuel injection relay do you mean fuel pump relay?


--
David Hunter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New hard to pull out the relay board [700][1989]
posted by  someone claiming to be c-dawg  on Sun Mar 20 04:53 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.