|
Thanks guys. Ok I checked the injetors ohms. My book which is a Chilton said the ohms should be 2.4. All the injectors checked out at 2.5-2.6 which should be ok. I took them off again and soaked them in mineral spirits and some top engine cleaner (Castle was the brand not as good as BG products but all I had)
I then took air pressure and blew back and forth from top to bottom. It worked, I finally heard the B20 run for more than 3 seconds. Sounds nice except for the massive exhaust leak. LOL. I found some more injectors for 15 to 20 dollars (used). But I dont wont to buy used injectors and be back in the same boat that I am in now. The cheapest I have found new ones are 90 dollars on IPD. If cruisinperformance can recondition these injectors I will buy the used ones and send off. I will let you all know if they can.
Thanks Eric
|