Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/1998 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

O/D problem phase II 200

posted by  Runinturtle2 on  Thu Apr 28 15:37 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I second pushing the wire carefully out through the shifter box. It’s a nightmare to replace the grommet if it pops out.

If you want to replace the sleeved connector to the solenoid wire, check a local junkyard. The turn signal/running light wire harness on the passenger side front is an exact match for the OD solenoid connector (the wire on the driver’s side is larger). Look inside the Molex connector below the back of the headlight capsule.
--
Jim (90 244DL 175K miles) turbo sways w/poly, front struts & bushings, OD wiring, downpipe, OEM hitch, remote-locks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O/D problem phase II [200]
posted by  edwill30134  on Thu Apr 28 08:46 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.