Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken Clutch Cable - Did I Replace It Right ? 200

posted by  t-bone on  Mon May 9 02:11 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 21 04:24 CST 2010
[RELATED]

The 86 240 has the weight set up you described as opposed to the earlier return spring, so no return spring on this year 240 is normal. I'd adjust the play on the release fork to 1/8 inch to make sure the clutch fully disengages when shifting. Too much play and getting it into gear may be a problem, too little play and the clutch will slip. Hope this helps.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken Clutch Cable - Did I Replace It Right ? [200]
posted by  Lummer57  on Mon May 9 01:42 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.