Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Poly bushings S90-V90 1998

posted by  96_964 on  Sat Aug 13 02:29 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 11 01:39 CST 2010
[RELATED]

I did mine several weeks ago. Purchased the links from fcpgroton, about $27 each, I think. The nuts on the new ones are a little larger than the OEM. I used a 3/8 drive ratchet with a swivel head. Put the car on jack stands. Turn the wheel all the way to one side for access. It would have been easier if I had removed the front wheels. The old ones where on very tight. I could not find a torque spec for the nuts. It took longer to set up for the job than to do the job.
Hope this is helpful,
David






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Poly bushings [S90-V90][1998]
posted by  arby  on Sat Aug 13 00:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.