Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rust!! How can I stop it? 200 1984

uid 6416's pic
posted by  archie777 on  Wed Aug 31 01:13 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 25 14:17 CST 2010
[RELATED]

First get a grinder and grind all the rust from the area. Then prime the bare metal with tremclad or equivalant. Place a sheet of metal to caver the hole from the bottom ( so water doesn't get in) or put one on top and one on the bottom. Screw or rivit in place. Then use outdoor caulking and seal the seams. Prime all of that. Get a can of rubber rocker guard. Put 2-3 coats of that on the top and bottom. Make sure you get all of the surrounding areas. Then put 2-3 coats of tremclad again.

I did the doors of my 245 like this 5 years ago and it lasted. This year I had other rust holes so I did it again. When I stripped off the old stuff it had not rusted again.

Check this out.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rust!! How can I stop it? [200][1984]
posted by  kenneth cardell  on Tue Aug 30 16:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.