Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C blower help? 700

posted by  john r. on  Thu Sep 1 11:30 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 9 09:41 CST 2010
[RELATED]

The resistor pack should be to the left of the blower motor and screwed to the lower housing. Follow the leads attached to the motor and it should connect at the resistors.

Check the green/red wire on terminal number 10 of the MCC control panel for 12 volts with the engine running for at least 10 seconds and the ac on. Also check terminal number 8(red wire) with the engine running for 12 volts. This lead lets the mcc module know the engine is running and the module will supply power to the compressor clutch through the low pressure switch after the engine is running for approximately 10 seconds. Let me know what you find. John
--
"It's hell to get old!"






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C blower help? [700]
posted by  indre740  on Thu Sep 1 05:08 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.