Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing header pipe 200 1991

posted by  stoney on  Thu Sep 1 14:27 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 17:48 CST 2014
[RELATED]

They are studs similar to those in the head to handle the exhaust manifold.

Due to age and such they can be tricky. Use lots of penetrating oil and heat and remove in a alternate pattern (5 or so turns each bolt in series so as to not load one stud with all the remaining torque). That way they don't snap.

Drilling out and rethreading and reinstalling the studs involved removing the manifold, which can lead to head studs breaking and that means removing the head...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing header pipe [200][1991]
posted by  someone claiming to be stuttgart  on Thu Sep 1 09:28 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.