The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

suspension on my 740 v8

Might have to do that. I was thinking of finding a place that sells springs in varying rates. But I'm not sure how to go about that and get good results. I'd like to go fairly stiff in the front, around 400# or so, and a little less in the rear. As far as the shocks, I thought I'd start with the koni adjustables set at firm, then adjust from there, or if it doesn't work well with the stiff springs, then get them custom valved.

I definitely want to further brace the car as well, but I'm not sure what the clearance issues are with the v8 in place. Can I run the IPD strut brace and lower brace?

Does anybody make a brace for the rear struts?

Not too excited about poly bushings, I've heard that they can tend to bind up and prevent proper movement. I'd rather go from quality rubber -> straight metal and skip the poly. I'll stick with rubber for now.

Thanks for the reply.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.