The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

130 AMP alternator

Hello Peter-

My V8 Volvo is a '93 940 wagon. Engine: a Ford 5.0. Sadly, the original builder passed away a few years ago and I have become a very willing caretaker for this marvelous car. I have truly done my best to keep it in the best of shape but never had the background of the original build required to do "Mods to the Mod."
Situation: The front bearing has failed on the 2G alternator. This setup had only 1 lead on the B+ output side.
Bought a PA Performance 3G alternator. It is installed with fused 2Ga leads to the battery.
RJM Injection Tech 3G Alternator harness is used to complete the installation.
All pretty straight forward to this point. Except for one 12 volt lead...

Peter- The green wire on the new 3G harness needs a 12 VDC source with the ignition switch in the "run" position.
Can you help me with the location/wire color to be used for my source (Back side of the IGN SW I think).

Thanks for your time.

Jeff






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.