The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ford 5.0 wiring and cooling setups

Here is the engine harness to body harness connections you will need to deal with:

Pin 1 - Oil Pressure (black) connection to the oil pressure sensor to operate the oil pressure light on the instrument panel.

Pin 2 - Temperature (yellow) connection to the temperature sensor to operate the temperature gauge on the instrument panel.

Pin 3 - Alternator (red) connection is to the Volvo ignition switch which supplies B+ through the instrument panel alternator light.

Pin 4 –

Pin 5 – Tachometer connection to the Volvo instrument panel tachometer.

Pin 6 –

Pin 7 - Ignition Start (blue/yellow) connection provides B+ from the Volvo ignition switch to the operating windings of the START relay added in the Converse conversion.

Pin 8 - Ignition Run (blue) connection provides B+ from the Volvo ignition switch.

Far more than you have a need to know can be found here:http://forums.turbobricks.com/showthread.php?t=250604






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.