The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question about setting up my carb fuel system

uid 6548's pic
posted by  Volvord 784VC on  Sun Apr 3 06:32 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jun 20 02:46 CST 2007
[RELATED]

You are correct that using the stock mechanical pump on the 5.0L and drawing directly from the tank will work just fine as long as the fuel lines are 5/16" (preferably 3/8"), carbs require about 4.5 psi, it is the volume that is more important. On my car since it was a gas EFI system I used the intank pump which produced about 12 psi, then installed a low pressure regulator and "T'ed" that back through the return line to maintain a constant 4.5 psi at the carb. This is a little more involved but really the result is the same.
--
Volvord 784VC www.telusplanet.net/public/gilesij/Volvord






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.