Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2009 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust Part 850 1995

posted by  Ken Temkin on  Tue Sep 16 03:22 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 12:06 CST 2014
[RELATED]

Got under my car last night to take a picture of the exhaust clamp I fashioned for the flexible pipe portion of the header. It's been there 5+ years.

Sorry the pictures don't show much but it was hard to shoot by just crawling under the car with my cellphone's camera.

Note that the bolts I used were one size diameter smaller than the original 'U'-bolt that came with the exhaust clamp. This needed to be done in order to clear the pipe. The bolts also have a 20-degree-or-so bend along the middle of their length, also to clear the pipe.

Locknutted the arrangement with double nuts.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust Part [850][1995]
posted by  vvic  on Wed Sep 10 05:40 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.