Volvo AWD V70-XC70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine failure at 88K- worn/wavy cylinder walls V70-XC70

My friend has had his 2000 V70 since it was new.It now has 88,000 miles on it. It has been using oil for the past two months at the rate of 2 quarts per 3000 miles. Last week it failed to start. The shop did a compression test and found no compression ( or very little). After pulling the head the cylinder walls are wavy with no visable cross hatching. Any idea what may have caused this? Is this a common faliure? The shop and I tend to agree that the fix is a new short block as it is probably to severe to bore oversize.
Jeremy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine failure at 88K- worn/wavy cylinder walls [V70-XC70]
posted by  someone claiming to be Wormy J  on Sun Sep 26 10:45 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.