The message to which you are about to reply is shown first. GO TO REPLY FORM
|
|
|
The problem is that in disconnecting the battery you have cleared the monitors or readiness codes. To restore these codes the vehicle must be driven through two complete drive cycles. $200.00 versus the actual time it takes to get the monitors back up on your car is a bargain. Volvo warranty pays something in the area of 3-3.5 hours labor to do this. It can be a major pain in the ass to get them back up in the course of a day or two and that is why it has been recommend to you that you drive the car around for a couple of weeks. Some of the early cars actually cleared the codes everytime you cycled the key and getting the monitors up on those cars darn near takes an act of God. Can you check monitor status with your code reader? If not most smog stations are pretty decent about checking monitors real quick to see if they are up so they can perform the inspection. This being the case I suggest that you do drive it for a few weeks and then stop in to wherever it is that you will be smogging it and asking them if they'd mind checking your monitors to see if they are up and if so could they please smog it.
Mark
|
|
* = Field is optional.
+ = Enter space delimited labels for this post. An example entry: 240 muffler
©Jarrod Stenberg 1997-2022. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.
