The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

testing switch with voltmeter? 850 1995

quick question about switches and voltmeter . . . What's the rule about testing switches and measuring ground / continuity? Should there be continuity between terminals ever? When switch is on / closed or when switch is off / open?

I'm trying to test the Throttle Position Sensor on 1995 850. There are 3 terminals. One is 5 v in from harness; one is the output from sensor (0.6 v - 4.2 v). I guess the other would be a ground(?) but I'm not sure. Should there necessarily be continuity between any 2 of those terminals (w/ switch removed from car).

I have reference values for the resistance between 2 of the terminals w/ switch connected in car, as measured at computer/ECU (via a "measuring unit" that dealer has -- I have no capacity to measure at ECU). I can only test with switch removed -- should the resistance be the same between those terminals as when connected in car?
--
Two 1995 854 GLT's (w/ manual transmissions)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.