The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Service light

1. Turn the ignition to the KPII position so the warning lamps on the dash are illuminated.

2. Locate test port(A) in the engine compartment behind the passenger side headlamp.

3. Remove the cover and pull the test lead wire out of the holder in the cover.

4. Insert the jumper into terminal #7, then press the buttom 4 times, wait approximately 5 seconds, and the red lamp should glow continuously. You are now in the data reset mode.

5. Press the button 1 time, and wait 5 seconds for the lamp to glow again, then press the button 5 times. After 5 seconds, the lamp will illuminate again; press the button 1 time, and you will see the lamp flash repeatedly for a couple of seconds indicating that the service lamp has been reset.

6. If a mistake is made, simply switch the ignition off and back on, to reset and start over.

NOTE: This reset procedure is applicable for 1993-1995 850 models only!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.