The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: HELP- key will not turn in ignition lock 850 1995

posted by  someone claiming to be Bruin on  Sun Dec 2 10:58 CST 2001 [RELATED]

When I removed the lock cylinder on my 855T '95, I used Bay 13 procedure and it take me (a amateur)15 minutes. Remove 4 torx from the underside of the cover, two ordinary screws holding the electrical switch plate and turning the lock to position 1 using the key. Using a small drill to depress the springloaded tab and the cylinder was in my hand. I oiled mine as it didn't turn properly, causing weired effects as ABS faults and engine cut-outs. I did not buy a new lock and therefore has no knowledge whether they are coded or not. Good luck.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.