The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: ABS warning light 850 1996

On '96s only, there was once a SB on how to remove 4 known to be bad wire crimp connectors under the fusebox and re-do them. I think the SB still exists but it's something that only a seasoned dealer tech would know about as it's not common anymore, most were fixed before. I still occasionally see one though, like I just fixed one last week.

I'm sorry to say that I don't have the SB # handy at the moment but the fusebox must be loosened (relays under dash removed), fuse box pulled up, old connectors cut and then I solder the wires. This applies to '96s only.

The bad connections also cause codes for front wheel sensors but those aren't the problem. The codes will need to be cleared too. It's about a 1-2 hour job depending on the experience of the person doing it.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.