The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Driver's window S70 98

posted by  someone claiming to be Mikebox, formerly mikebox on  Fri Oct 27 07:40 CST 2000 [RELATED]

Absolutely, once you remove the door panel, use a flat blade screwdriver to compress 4 small metal clips on the switch housing and it slides right out of the panel. I didn't look real closely, but it appears that the lock module can be removed from the housing, but I think the rest was pretty much a sealed unit. I'm sure some contact cleaner spray would penetrate and help. You can replace the door panel with out the switch and then plug the connectors back into the switch before re inserting the switch housing into the arm rest. Try the switch out after cleaning--if you have to replace you wont have to remove the panel again. good luck.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.