The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Replacing Dash Bulbs 850 1994

All you need is a torx 25 screwdriver, a 10mm socket, and a small sharp instrument to get the two plugs out of the screw holes on the sides, and the straps out of the glove box door. Don't turn on the key with the air bag disconected or you'll set an SRS code. There is a tab on the dash that fits in a slot to the right of the center vent. Make sure the tab enters the slot or you will have a gap where the dash pad wraps around the vent. Don't miss the two screws going up into the dash from the glove box opening. 1 near the glove box light switch is a pain. Change all four guage bulbs and 1 or both clock bulbs, depending on which clock/trip computer you have.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.