All you need is a torx 25 screwdriver, a 10mm socket, and a small sharp instrument to get the two plugs out of the screw holes on the sides, and the straps out of the glove box door. Don't turn on the key with the air bag disconected or you'll set an SRS code. There is a tab on the dash that fits in a slot to the right of the center vent. Make sure the tab enters the slot or you will have a gap where the dash pad wraps around the vent. Don't miss the two screws going up into the dash from the glove box opening. 1 near the glove box light switch is a pain. Change all four guage bulbs and 1 or both clock bulbs, depending on which clock/trip computer you have.