The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2003 S40 Passenger Side Headlight Removal and Replacement S40-V40

I've had to do this job a couple of times due to the originals disintegrating plastic adjuster and housing. The first replacement also had issues but was usable. Now I have the second replacement and all is good. Follow Alschnertz instructions--and I'd add this -- pull the turn signal assembly absolutely straight out -- if you angle it the two thin plastic locating pins at the rear of the lamp may break. And 2nd -- take note of the drain and vent tubes in the rear of the headlight assembly--they are easily lost. Oh, another point--the glass lens is easily removed to clean the inside if needed. At the salvage yard I swapped out a sandblasted lens for a nice one that came from an assembly that had a poor reflector. -- Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.