The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

You did it w/o removing assembly? Here's what I did... S70 1998

How on earth did you get the new clips back on w/o removing the assembly? I just finished installing the driver's side lens, and didn't see how it could be done w/o removing the entire assembly. Maybe the S/V70s are different. Here's what I did:

1. Remove wiper arm (10mm ratchet)
2. Remove lower headlight trim piece (just pull)
3. Disconnect assembly wiring
4. Remove hood latch (2-12mm? bolts). Didn't have room otherwise
5. Remove the 4 long bolts (10mm). 1 behind the blinker, 3 from the back
6. Remove assembly
7. Pop the clips off (new ones in box)
8. Remove lens, bulbs and rubber gasket
9. GENTLY clean reflector (water and soft cloth)
10. Install new gasket, bulbs (easier now than later...) lens
11. Install clips (I used a small screwdriver)
12. Re-install assembly.

Did I miss anything? I'll take "after" pix tonight when it's nice and dark, and post them.

/Scott






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.