The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing a HKS variable boost controller

I am still new to all of this and need a lot of help. I own a 1994 940 Turbo with the following modifications: modified airbox with K&N panel filter, MVP 3" complete exhaust system, one turn on the wastegate rod. Last fall I bought a HKS variable boost controller (part # 17265-111US) from a local speed shop, but never got around to installing it - didn't want to start cutting hoses until I fully understood what I was doing. I've checked the forums on this site and Turbobricks and I still can't figure out how to do this installation. Putting a tee into the actuator pressure line between the turbo and the wastegate actuator, then connecting a hose to the Flow In side of the valve makes sense, but I have no clue how/where to connect the Flow Out side of the valve to a compressor suction source as instructed. Can anyone point me in the right direction?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.