The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EGR Valve Cleaning

posted by  someone claiming to be johnh on  Thu Nov 21 08:43 CST 2002 [RELATED]

Not too hard to do, and the Bay 13 instructions work fine. The hardest part is getting the back 8mm bolt loose. Be careful to not twist the temp sensor wiring when removing it from the valve. I found the easiest way was to remove the egr valve, then remove the wiring by holding the wiring while turning the valve. I reinstalled the sensor before reinstalling the valve. You can disconnect the other end of the wiring to avoid twisting, but this is a PITA.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.