Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

EGR Valve Cleaning

posted by  someone claiming to be johnh on  Thu Nov 21 08:43 CST 2002 [RELATED]

Not too hard to do, and the Bay 13 instructions work fine. The hardest part is getting the back 8mm bolt loose. Be careful to not twist the temp sensor wiring when removing it from the valve. I found the easiest way was to remove the egr valve, then remove the wiring by holding the wiring while turning the valve. I reinstalled the sensor before reinstalling the valve. You can disconnect the other end of the wiring to avoid twisting, but this is a PITA.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New EGR Valve Cleaning [850][1994]
posted by  someone claiming to be pssstue  on Thu Nov 21 06:33 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.