The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Addition, how to diagnose. 850

The link rods should have ZERO play on them when a pry bar is used on the ball joints on both ends. As for the upper spring seat a.k.a. strut bearing plate, simply open up the hood, and push down on the car so as to cause suspension travel. If the top of the strut moves, it has probably failed. As for the anti-roll bar, remove both link rods and go for a drive over the same conditions that cause the noise. Be sure not to over do turns as the roll of the car will now be greater and because you will not be used to the change in dynamics, the limits of cornering will have changed. If when doing this test, the noise does not occur, it is probably either the link rods or the anti-roll bar, and if you perform the link rod test, you will then be able to know which component exactly has failed.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.