The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rubber elbow on manifold help 850

posted by  someone claiming to be Mike H on  Wed Apr 30 17:14 CST 2003 [RELATED]


I ran the line today. Probaly around 9ft of hose. I found the destination which is near the firewall on drivers side. I ran in along the fuel rail which is above the manifold. Before i started the engine i cleared a2 codes. Since I cut the cable I got 232 and 426. Before I cut it I got 425 and 426.
So hopefully that is why I've always received the 02 sensor errors.

Right when I started the engine it no longer revved to 1800rpm.
The connection was very tight location to get your hands into to get the new hose onto. I ended up using pliers to manuvere the hose onto and ti-wrapped the new hose without being visable and keeping it away from heat. I dont know why volvo didnt do this in the first place?!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.